Shampoo Spout Pouches With Corner Spout
  • Shampoo Spout Pouches With Corner Spout
  • Shampoo Spout Pouches With Corner Spout
  • Shampoo Spout Pouches With Corner Spout
1 / 1

Shampoo Spout Pouches With Corner Spout

Parameter Specification
Pouch type Stand-up pouch with corner spout
Capacity 100 ml to 2 L, custom sizes
Spout and cap Custom spout and cap
Printing Digital or gravure
MOQ, digital print 1,000 pcs per design
MOQ, gravure print 10,000 pcs per design
Production time 7-15 days after artwork approval
Testing Leak-proof test before shipment
  Get A Free Quote
Product Information
Rows of corner spout shampoo pouches in several sizes lined up on a grey table with sample cartons behind

Corner Spout Pouch

Shampoo Spout Pouches With Corner Spout: Custom Shampoo Spout Pouch Private Label

A custom shampoo spout pouch private label program starts with a corner spout pouch in sizes from 100 ml to 2 L, printed from 1,000 pcs per design.

The corner spout sits at the top edge of a stand-up pouch, so the pack pours like a small jug and squeezes out cleanly as it empties. Spout, cap, size, structure and print are all customizable to your shampoo's viscosity and your filling method.

Spouts are welded on our own automatic spout welding line, and every pouch is leak-tested before shipment. Digital print starts at 1,000 pcs per design, gravure at 10,000 pcs. Lead time is 7-15 days after artwork approval.

  • Capacity range

    100 ml to 2 L, with exact sizes confirmed in the quote.

  • Spout and cap

    Custom spout and cap, matched to your shampoo and filling line.

  • Testing

    Leak-proof testing before shipment.

Request an itemized quoteAsk for a free sample

Corner Spout or Center Spout: Which Pours Shampoo Better From a Pouch

For shampoo, the corner spout is the usual choice for pouring and squeezing.

Pouring and squeezing

A corner spout sits at the top edge, so tilting the pouch brings the spout to the lowest point of the pour path. The product runs out along the pouch wall instead of dropping straight down through a centered opening. You can control the flow with a light squeeze, which suits refilling a pump bottle through a narrow neck.

Residue and standing

Because the spout is at the edge, the pouch can be rolled or pressed from the bottom up, which usually leaves less product behind than a centered opening. The pouch still stands on its bottom gusset on a shelf or in a salon cabinet. Thicker, higher-viscosity shampoo flows more slowly, so the spout bore matters as much as the spout position.

From 100 ml Travel Sizes to 2 L Salon Refills: Choosing Pouch Size and Fill

Three size bands cover most shampoo programs.

Travel size, around 100 ml

Small pouches suit hotel amenities and travel toiletries. They usually pair with a small-bore spout and a simple cap.

Home refill

Mid-range pouches refill pump bottles at home. Final size depends on your bottle volume and fill weight, confirmed in the quote.

Salon size, up to 2 L

Large pouches need a sturdier structure and a spout that tolerates the weight. We recommend one structure in writing and price each option when two fit.

Spout Neck Size and Cap Fit: Matching the Spout to Your Shampoo and Pump or Cap

Spout bore, cap type and viscosity need to be chosen together.

Bore, cap and viscosity

Thin shampoo and body wash pour through a medium bore, while thicker formulas and gels usually need a wider one. Cap type changes the use: a screw cap suits refill pouches, and a flip-top suits direct dispensing. Tell us your product and viscosity, and we confirm the spout and cap in the quote. Custom spout and cap options are available.

Filling equipment and weld position

Your filling nozzle has to fit the spout neck, so send nozzle details if you have them. Spouts are welded on our own automatic spout welding line, which keeps the weld position repeatable from pouch to pouch. Consistent position matters on automatic filling lines, where a spout sitting off by a few millimeters can cause misfeeds.

Leak-Proof Testing on Shampoo Spout Pouches: Spout Weld, Seams and Pre-Shipment Checks

Leaks usually start at the spout weld or the side seams.

Spout weld

The spout area is checked because it carries the load when the pouch is squeezed or dropped. Weld position is controlled on the automatic line.

Side and bottom seams

Seams are inspected for seal width and consistency, since surfactant-heavy products can attack weak seals.

Pre-shipment leak test

Pouches are leak-tested before shipment. Test requirements for your product can be agreed with us in advance.

11 quality checks

Production runs through 11 quality checks before packing, and pouches are packed by hand in the cleanroom.

Shampoo Refills, Salons, Hotel Amenities and Travel Toiletries: What Each Orders

Shampoo refills

Mid-size pouches with screw caps, often several SKUs per order.

Hair salons

Large pouches up to 2 L with a wide-bore spout.

Hotel amenities

Small pouches with a simple cap and the hotel's own print.

Travel-size toiletries

Around 100 ml, light, with a secure cap.

Low MOQ Private Label Shampoo Pouches: Digital From 1,000 Pcs, Gravure From 10,000 Pcs

Choose the print method by order size and how often you reorder.

Digital print

Digital print starts at 1,000 pcs per design with no plates and no cylinder cost. It suits launches, test runs and several flavors or SKUs in one order, with color matched to the approved proof.

Gravure print

Gravure starts at 10,000 pcs per design and suits repeat orders at the lowest unit price. A one-time cylinder charge applies per color and the cylinders are reused on reorders. Lead time for both is 7-15 days after artwork approval. Shipping is quoted separately with the order, and we do not promise arrival dates. Price depends on material, size, colors, quantity per design and extras.

Custom Printed Shampoo Pouches: Brief, Free Design, Free Sample, Production

  1. Send your brief

    Product, quantity, a reference pouch photo or link. Artwork is optional.

  2. Quote and design in one business day

    You get a recommended structure, an itemized price and free design support, including a free die-cut template.

  3. Free sample

    Check size, feel and fit. The sample is free and you pay the courier.

  4. Production

    Production starts only after you confirm the final artwork, and takes 7-15 days.

Food-Contact and Personal Care Documents: What Your Buyer or QA Team Can Ask For

Documents are available with the quote.

FDA 21 CFR test report

Our PE film is tested to FDA 21 CFR food-contact requirements. This is a test report, not an FDA certification.

ISO 22000 and ISO 9001

Food safety management and quality management certificates are available.

Personal care requirements

Requirements specific to your market are confirmed at the quote stage.

Send Your Shampoo, Fill Size and Quantity per Design for an Itemized Quote in One Business Day

Send the product and its viscosity, fill volume, pouch type or photo, quantity and number of designs, artwork or idea, and cap type. You get an itemized quote in one business day, and you can request a free sample.

Email your briefWhatsApp us

Email: [email protected], WhatsApp: +86 182 1944 5665

You May Also Like

Recyclable Refill Pouches With Spout

Recyclable Refill Pouches With Spout

VIEW MORE
Cannabis Packaging Pouches For Dispensaries And Edible Brands

Cannabis Packaging Pouches For Dispensaries And Edible Brands

VIEW MORE
Kraft Paper Flour Bags For 1–5 Kg

Kraft Paper Flour Bags For 1–5 Kg

VIEW MORE
Square Bottom Stand-Up Pouches

Square Bottom Stand-Up Pouches

VIEW MORE

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.