1 / 1

Питьевой пакет-дойпак 300 мл 500 мл с носиком и застежкой для сока и питьевой воды

Параметр	Спецификация
Объём	300 мл, 500 мл, доступны индивидуальные размеры
Структура	PET/NY/PE; PET/AL/PE для увеличенного срока годности
Укупорка	Носик с винтовой крышкой и застёжка-молния
Расположение носика	В углу или по центру верхней части
Печать	Цифровая или глубокая (ротогравюра)
МОQ на дизайн	1 000 шт. цифровая печать; 10 000 шт. глубокая печать
Срок производства	7–15 дней после утверждения макета
Пленка для контакта с пищевыми продуктами	Полиэтиленовая пленка, протестирована по FDA 21 CFR

Получить бесплатное предложение

Информация о продукте

Custom Spout Pouch with Zipper for Juice: 300 ml and 500 ml

Rows of filled 300 ml and 500 ml spout pouches with zipper lined up beside sample cartons on a grey table

A custom spout pouch with zipper for juice and drinking water, made in 300 ml and 500 ml, with the zipper handling repeat opening and refilling.

This pouch is not for carbonated drinks or hot-fill lines that need a rigid container, and a zipper adds cost that a single-serve shot pouch does not need. It suits juice, cold brew, still water, sports drinks and smoothies that are opened more than once, poured, or topped up from a larger bottle.

The structure is PET/NY/PE for puncture resistance, with PET/AL/PE available when the drink needs a longer shelf life. Every pouch is checked for leaks before shipping. Digital print starts from 1,000 pcs per design and gravure from 10,000 pcs per design.

Sizes — 300 ml and 500 ml, with custom dimensions on request
Structure — PET/NY/PE standard, PET/AL/PE for longer shelf life
Print — Digital from 1,000 pcs, gravure from 10,000 pcs per design
Production time — 7-15 days after artwork approval

Request an itemized quote Order a free sample

Zipper Spout Pouch for Juice: Why Add a Zipper to a Spout Pouch

The zipper and the spout do different jobs, and a drink pouch benefits from both when it is opened repeatedly.

What the zipper adds

A standard spout pouch fills and pours through the cap. A zipper adds a wide opening above the spout, so a consumer can refill from a bottle, add ice or fruit, or clean the inside. It also lets the pouch be resealed after the top is torn open, which suits drinking water carried in a bag over a day.

When a plain spout is the better choice

If the drink is sold as a single serve, such as a juice shot, the zipper is usually unnecessary. A plain spout pouch costs less and has one fewer seal to inspect. We recommend the zipper version when refilling or reuse is part of how the product is used, and we price both versions on the quote when either could fit.

300 ml or 500 ml: Choosing Pouch Size, Spout Position and Spout Bore

Both capacities can be customized, and the final bag size is confirmed against your product sample.

Corner spout or top center spout

A corner spout gives a fast, directed pour and suits sipping straight from the pouch. A top center spout keeps the pouch balanced when standing and suits pouring into a glass. Pouch size is set by fill volume and product density, so the dimensions for 300 ml or 500 ml are confirmed after we see your sample.

Spout bore by thickness and flow

Thin liquids such as water and juice usually run well through a mid-size bore. Smoothies and thicker blends need a wider bore to avoid slow flow. We recommend a bore from your product's thickness and confirm it on the proof.

PET/NY/PE or PET/AL/PE: Puncture Resistance and Shelf Life for Drink Pouches

The film structure sets how well the pouch survives handling and how long the drink keeps its flavor.

PET/NY/PE for puncture resistance

The nylon layer in PET/NY/PE resists puncture and flex cracking during filling, packing and transport. For juice, cold brew and water with a normal shelf life, this is the structure we typically recommend. The PET outer layer carries the print.

PET/AL/PE for longer shelf life

Oxygen pick-up is the main risk for juice and cold brew, since it dulls flavor over time. PET/AL/PE adds an aluminum foil barrier for products that need longer storage. Foil structures may carry a higher MOQ, which we confirm on the quote.

Juice Shots, Cold Brew, Water, Sports Drinks and Smoothies: What Each Needs

Each drink puts a different demand on volume, spout bore and structure.

Juice shots

Small fills suit a small-bore spout. Choose PET/AL/PE if the shots need longer storage.

Cold brew coffee

Oxygen is the main concern, so a foil barrier is worth pricing. A mid bore pours well for thin liquid.

Drinking water

PET/NY/PE is usually enough. The zipper helps with refilling and reuse of the pouch.

Sports drinks and smoothies

Sports drinks run well through a mid bore. Smoothies are thicker and need a wide bore, confirmed against your sample.

Leak-Proof Testing: How We Check Spout Pouches Before They Ship

A spout pouch holding water must not weep at the spout, the seals or the zipper.

Leak testing before shipment

Spout pouches are leak-tested before they ship. A pouch filled with water must not leak. We do not publish test figures that are not backed by a report.

Cleanroom production

Printing, lamination and bag making run in our own 6,520 m² cleanroom plant in Shenzhen, so the film and spout seals are made in a controlled environment.

11 quality checks

Production goes through 11 quality checks before packing. Pouches are then packed by hand in the cleanroom.

Low MOQ Juice Pouches: Digital From 1,000 Pcs, Gravure From 10,000 Pcs

Choose the print method by order size and how many designs you need.

Digital print, from 1,000 pcs per design

No printing plates and no plate cost. Several flavors or SKUs can be combined in one order.

Gravure print, from 10,000 pcs per design

A one-time cylinder charge applies per color, and the cylinders are reused on reorders.

Lead time

7-15 days of production after artwork approval. Shipping is quoted separately with the order.

Foil structures

The MOQ for PET/AL/PE may be higher and is confirmed on the quote.

Private Label and OEM Juice Pouches: Free Design, Free Sample, Production

The same five steps apply to private label brands and OEM/ODM projects.

Buyer brief desk with reference pouches, tape measure, notepad and laptop for a custom juice pouch order

Step 1

Send your brief

Give us the drink, fill size, quantity and a reference photo or link. Artwork is optional.

Design workstation with die-line sheet, colour cards and blank spout pouch samples for artwork layout

Step 2

Free design support

Our design team lays out your artwork or builds it from an idea, and prepares the die-line.

Step 3

Digital proof

You approve the proof. The 7-15 day production time starts from this approval.

Sample spout pouches in two sizes laid out with a tape measure, scale and open carton on a packing table

Step 4

Free sample

We send a sample for checking size, feel and fit. The sample is free and you pay the courier. A sample printed with your own design is priced on the quote.

Spout pouches checked and packed into cartons on a pallet in a clean packing area

Step 5

Production

Production runs with 11 quality checks, followed by packing and shipping on the Incoterm agreed on the proforma invoice.

Food-Contact Film Documents for Juice and Drinking Water Pouches

Quality and compliance teams can review the film documents before ordering.

FDA 21 CFR test report

The PE film is tested to FDA 21 CFR food-contact requirements.

ISO 22000

Production runs under an ISO 22000 food safety management system.

Document copies

Copies are sent with the quote.

Send Your Drink, Fill Size and Quantity per Design for an Itemized Quote

Tell us the drink and fill, pouch size, quantity per design, number of designs, artwork or idea, and target market. You get an itemized quote with a recommended structure within one business day, and you can ask for a free sample.

Request a quote Order a free sample

Отправьте ваш запрос сегодня

Свяжитесь с нами прямо сейчас для получения профессионального решения и быстрого расчёта стоимости.

Загрузка файлов не требуется: :