두꺼운 크라프트지 스탠드업 스파우트 파우치
  • 두꺼운 크라프트지 스탠드업 스파우트 파우치
  • Thick Kraft Paper Stand-Up Spout Pouches
  • Thick Kraft Paper Stand-Up Spout Pouches
1 / 1

두꺼운 크라프트지 스탠드업 스파우트 파우치

사양 항목 사양
구조 크라프트/PET/PE, 크라프트/AL/PE
형태 용접형 스파우트가 있는 스탠드업 파우치
스파우트 구경 소형, 중형, 대형 (약 20 mm 이상)
인쇄 디지털 또는 그라비어
식품 접촉용 필름 PE는 FDA 21 CFR 기준으로 시험 완료
최소 주문량(MOQ) 디지털 인쇄 1,000개, 그라비아 인쇄 10,000개
생산 기간 아트워크 승인 후 7~15일
출하 전 검사 누수 테스트, 11개 품질 검사 항목
  무료 견적 받기
제품 정보
Rows of kraft paper stand-up spout pouches filled with sauce, lined up with shipping cartons behind

Kraft Spout Pouch Low MOQ

Custom Kraft Paper Spout Pouch: Kraft/PET/PE and Kraft/AL/PE Stand-Up Pouches for Liquids and Pastes

A custom kraft paper spout pouch gives sauces, drinks and pastes a natural paper exterior with a full-barrier laminate inside, in two structures: Kraft/PET/PE and Kraft/AL/PE.

The kraft layer carries the print and the look. The barrier comes from the inner layers, so the paper face does not limit shelf life or leak resistance. Each pouch is a stand-up format with a welded spout, and every pouch is leak-tested before shipment.

Digital printing starts at 1,000 pcs per design, with production in 7-15 days after artwork approval. The PE film is tested to FDA 21 CFR food-contact requirements. Shipping time is quoted with the order.

  • Two structures — Kraft/PET/PE for standard barrier. Kraft/AL/PE for oily, acidic or light-sensitive fills and longer shelf life.
  • Digital MOQ — 1,000 pcs per design, no printing plates, several designs can share one order.
  • Leak-tested — Pouches are leak-tested before shipment, with 11 quality checks before packing.

Request an itemized quoteOrder a free sample

How the laminate works

Kraft Paper Spout Pouch: Natural Paper Look, Full Barrier Inside

The paper is the outside. The barrier sits underneath it.

Kraft/PET/PE

The outer kraft paper is printed, then laminated to a PET layer and a PE heat-seal layer. PET adds stiffness and puncture resistance, and the PE layer forms the seals and the spout weld. This structure suits liquids and pastes with a moderate shelf life that are not sensitive to light or oxygen.

Kraft/AL/PE

Replacing PET with an aluminum foil layer gives a near-complete barrier to oxygen, moisture and light. It is the structure to choose for oily, acidic or light-sensitive products and for longer freshness. The foil cuts transparency to zero, so a window is not possible on this build.

A note on Kraft/PLA

Kraft/PLA has a weaker barrier and suits only short shelf-life products. We quote it only when you ask for that exact structure, and film certificates come with the quote.

Kraft gives the look; PET or foil sets the barrier; PE makes the seal.

Kraft/PET/PE or Kraft/AL/PE: Which Structure Fits Your Sauce, Drink or Paste

Product, shelf life and light sensitivity decide the structure.

How to choose

Start with the fill. Sauces and health drinks with oil, acid or light-sensitive ingredients usually need the foil structure. Baby food and gels depend on the shelf-life target and the filling method. If the product is hot-filled or pasteurized, tell us the temperature so we can match the film.

When both structures could work, we recommend one in writing and price each, so you can compare cost against barrier on the same quote. Compostable or recyclable options are confirmed only for the exact structure you ask about.

  • Foil: oily, acidic, light-sensitive or longer shelf life
  • PET: moderate shelf life, standard barrier
  • Kraft/PLA: not for long shelf life

Spout Size and Position for Thick Sauces, Purees and Liquid Refills

The spout is matched to the product, and we recommend it from a product sample.

  • Small bore

    Suits gels, shots and baby food, where flow is controlled and portions are small. Fits stand-up pouches with a top-center spout.

  • Mid bore

    Suits drinks and thinner sauces. It pours cleanly and refills easily, with the cap chosen for how often the pouch is opened.

  • Wide bore, about 20 mm and up

    Suits thick sauces, purees, detergent refills and other thick products that would clog a narrow opening. A corner spout pours at an angle with good control.

  • Pouch size by fill

    Pouch dimensions follow the fill volume and product density. Use our free Pouch Capacity calculator to estimate the size before you request a quote.

Sauces, Health Drinks, Baby Food, Gels and Detergent Refills: What Each Needs

Each product puts a different demand on the pouch.

  • Sauces

    Oil and acid attack seals. Foil structure and a wide or mid bore spout for flow.

  • Health drinks

    Barrier and light protection depend on ingredients. Mid bore spout for pouring.

  • Detergent and liquid soap refills

    Surfactants stress seals and weight stresses the pouch. Thicker gauge for 1-2 L, with a wide bore or flip-top.

  • Baby food

    Small bore spout. Structure depends on the filling process and shelf life.

  • Gels and thick pastes

    Puncture resistance and a wide enough bore for clean dispensing.

How We Leak-Test Kraft Spout Pouches Before They Ship

Seals and spout welds are checked before anything is packed.

Pre-shipment leak testing

Pouches are tested for leaks before shipment. We do not publish test figures here, and the test method for your fill can be confirmed with your order.

Seal and spout weld checks

Side seals, bottom seal and the welded spout are inspected during production. Weak welds are the usual failure point on heavy or oily fills.

11 quality checks before packing

Each order passes 11 checks before it is packed for shipment.

Cleanroom production

Printing, lamination and bag making run in our own 6,520 m² cleanroom plant in Shenzhen, in operation since 2005.

Low MOQ Kraft Spout Pouches: 1,000 Pcs Digital, 7-15 Days After Proof

Digital printing means no plates, and several designs can share one order.

Digital and gravure minimums

Digital printing starts at 1,000 pcs per design with no plate cost, which suits launches, test runs and several flavors or SKUs ordered together. Gravure starts at 10,000 pcs per design, with a one-time cylinder charge per color that is reused on reorders, and suits repeat orders at a lower unit price. Foil and other specialty structures may carry a higher minimum, confirmed in your quote.

Production time

Production takes 7-15 days after artwork approval. Air, sea or express shipping is quoted separately with the order, and we do not promise a delivery date.

Digital MOQ 1,000 pcs per design
Gravure MOQ 10,000 pcs per design
Production 7-15 days after proof

Private Label and OEM Kraft Pouches: Brief, Free Design, Free Sample, Production

Four steps, one team.

  1. Send the brief

    Product and fill, pouch type or reference photo, quantity per design. Artwork is optional.

  2. Quote and design in 1 business day

    You get a recommended structure, an itemized price, and free layout help from an idea or reference photo. Finished files are reproduced as supplied. Size, material, print colors, spout and extras are all customizable.

  3. Free sample

    A similar bag to check size, feel and fit. The sample is free, and you pay the courier.

  4. Production

    7-15 days after artwork approval, followed by 11 quality checks before packing.

Buyer and supplier reviewing kraft spout pouch samples and swatches at a meeting table

Food-Contact Film Documents and Buyer Questions on Kraft Spout Pouches

Is the film FDA approved?
No. We do not say that. The PE film is tested to FDA 21 CFR food-contact requirements, and the test report is available.
Which certificates can I get?
ISO 22000 and ISO 9001 documents can be viewed on the website, and copies are sent with the quote.
Are kraft spout pouches recyclable or compostable?
It depends on the exact structure. A foil laminate is not recyclable. Tell us the structure you need, and we confirm what applies, with film certificates in the quote.
Does the sample cost anything?
The sample is free. You pay the courier.
Is shipping included?
No. Shipping is quoted with the order, by air, sea or express, under EXW, FOB, CIF or DDP.

Send Your Product, Fill Size and Quantity per Design for an Itemized Quote

Send the product and fill per bag, a pouch type or photo, size if known, quantity per design, number of designs, artwork or idea, extras and target market. You get a recommended structure and an itemized quote within one business day.

Request a quoteOrder a free sample

Email: [email protected], WhatsApp: +86 182 1944 5665, Website: https://www.yltpack.com/

이런 제품도 찾으시나요?

재활용 가능한 스파우트 리필 파우치

재활용 가능한 스파우트 리필 파우치

더 보기
디스펜서리 및 식용 제품 브랜드를 위한 대마 포장 파우치

디스펜서리 및 식용 제품 브랜드를 위한 대마 포장 파우치

더 보기
1–5 kg 크래프트지 밀가루 봉투

1–5 kg 크래프트지 밀가루 봉투

더 보기
스퀘어 바텀 스탠드업 파우치

스퀘어 바텀 스탠드업 파우치

더 보기

관련 기사

지금 문의하기

전문적인 솔루션과 빠른 견적을 원하시면 지금 바로 문의해 주세요.